Installing the right seat

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .

CAUTION: Heavy component .
Heavy components can lead to injury or damage .

Remove and install heavy components with the aid of another person/other persons.

Courtesy of BMW OF NORTH AMERICA, INC.

With the help of a support person, carefully lift the right seat (3) into the vehicle.
Connect connectors (2) and lock.
Correctly position and clip in the cable bracket (1).
Correctly position the right seat (3).
Disconnecting all battery ground leads
Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Seat rail to body
Screw
	42 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Check the attachment points of the covers (1) for damage and, if necessary, replace the covers (1).
Correctly position the cover (1) and clip in.

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in the emergency release (2).
Engage the rear seat backrest (1) toward the rear.

Courtesy of BMW OF NORTH AMERICA, INC.
Check the attachment points of the covers (1) for damage and, if necessary, replace the covers (1).
Correctly position the cover (1) and clip in at the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.
Fold both rear seats forward.

Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Seat rail to body
Screw
	42 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Check the attachment points of the covers (1) and (2) for damage; if necessary, replace the covers (1) and (2).
Correctly position and clip in the covers (1) and (2).
Adjust both rear seats to the normal position.

Courtesy of BMW OF NORTH AMERICA, INC.