Installing the ornamental grille on the center bumper cover (M package)

• Position the ornamental grille of the center bumper cover (1) on the locks (arrows) and snap it in.

  Courtesy of VOLVO CARS CORPORATION

  NOTE: Perform the steps on the left and right side.
• Snap-in the brace of the bumper cover (1) on the retaining lug (2).

  Courtesy of VOLVO CARS CORPORATION

• Position and clip wiring harness (2) into all the holders.
• Connect the plug connections (1) and lock.

  Courtesy of VOLVO CARS CORPORATION

Follow-up work 

• Refer to INSTALLING THE AIR ROUTING TRIM ON THE LEFT AND RIGHT (M PACKAGE) .
• Refer to INSTALLING THE FRONT BUMPER COVER .
• Refer to PARTIALLY INSTALLING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
• Refer to PARTIALLY INSTALLING THE LEFT FRONT AND RIGHT WHEEL ARCH TRIM .
• Refer to INSTALLING FRONT ORNAMENTAL GRILLE .
• Refer to INSTALLING THE FRONT LEFT AND RIGHT WHEELS .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT .
• Refer to INSTALLING THE FRONT HOOD SEAL .