Installing the tailgate lock of the upper trunk lid

Check 

• Check the retaining lug (1) on the Bowden cable (2).

Courtesy of VOLVO CARS CORPORATION

Result 

» The retaining lug (1) is damaged or is not present.

Measure

• Replace the Bowden cable (2).

• Install the tailgate lock (4).
• Tighten down screws (3).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Trunk lid lock
  Screw	tightening torque	19 Nm

  Courtesy of VOLVO CARS CORPORATION

• Connect both connectors (2).
• Hook the Bowden cable (1) and lock it in place correctly.

Follow-up work 

• Refer to INSTALLING BOTTOM TAILGATE TRIM PANEL .
• Refer to INSTALLING THE BOTTOM TRUNK LID LOCKING SWITCH .