If installed: Remounting the driver camera system (DCS)

Removing the driver camera system (DCS) 

• Release the screws (1)  on the Driver Camera System (DCS) (2)  .
• Feed out and remove the Driver Camera System (DCS) (2)  upwards at the guides (3)  of the instrument cluster (4)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  Installing the driver camera system (DCS) 

• Feed the Driver Camera System (DCS) (2)  into the guides (3)  of the instrument cluster (4)  from the top.
• Tighten the screws (1)  on the Driver Camera System (DCS) (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Driver Camera System (DCS) on instrument cluster
  Screw
  	tightening torque	1.05 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.