Remove the exhaust camshaft sensor of cylinder bank 2

Precondition 

• Ignition is switched off.

Preliminary work 

• Refer to REMOVING THE ACOUSTIC COVER .
• Refer to REMOVING LEFT INTAKE SILENCER HOUSING .
• Refer to REMOVING THE LEFT INTAKE SILENCER BRACKET .
• Refer to REMOVING THE IGNITION COIL ON CYLINDER 5 .

• Push the wiring harness (1) aside.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock plug connection (1) and disconnect.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Set the wiring harness in area (1) aside.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen nut (2).
• Carefully push the fuel line (1) aside.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screw (1).
• Remove exhaust camshaft sensor of cylinder bank 1 (2).

Courtesy of BMW OF NORTH AMERICA, INC.