Installing the center cowl upper part

• Installing the center cowl upper part (3).
• Tighten down screws (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Cowl upper part center to bottom cowl
  Screw
  	tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Use the holders to fasten the wire (1) to the center cowl upper part (3).
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Cowl upper part center to bottom cowl
  Screw
  	tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE FRONT HOOD SEAL AT THE REAR .
• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .