Installing guide for rear center bumper cover

• Position guide for rear center bumper cover correctly (2).
• Tighten nuts (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bumper guide, rear
  Nut
  	Tightening torque	6 Nm

  Courtesy of VOLVO CARS CORPORATION

• Tighten nuts (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bumper guide, rear
  Nut
  	Tightening torque	6 Nm

  Courtesy of VOLVO CARS CORPORATION

  NOTE: Perform the steps on the right and left side.
• Install the cover (2).
• Mount the expanding rivets (1).

  Courtesy of VOLVO CARS CORPORATION

Follow-up work 

• Refer to INSTALLING REAR BUMPER PANEL  .
• Refer to INSTALLING REAR REFLECTOR .
• Refer to INSTALLING TAIL LIGHT ON LEFT AND RIGHT SIDE PANEL .
• Refer to INSTALLING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .