5175 UNDERSHIELD / Splash Guard / Protective Cover
5175 TIGHTENING TORQUE OVERVIEW
| Protective plate for SCR emissions sensor | ||
| Hexagon screw | Tightening torque | 2.6 Nm |
| Retaining plates for vehicle underbody cover | ||
| Sheet metal nut/plastic nut Replace nuts. | Tightening torque | 3 Nm |
| Underbody planking on body | ||
| Plastic nut | Tightening torque | 2.6 Nm |
| Underbody planking on body | ||
| Hexagon screw | Tightening torque | 2.6 Nm |
| Undershield, side | ||
| Hexagon screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Undershield, tank | ||
| Hexagon screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Undershield/frame | ||
| Hexagon screw | Tightening torque | 3 Nm |