LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
X7 M50i
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Anti-Theft Systems
>>
Body Equipment -- Repair (2 Of 2) (G07)
>>
51 47 Floor / Trunk / Engine Compartment Trim Panels
>>
51 47 219 Removing and installing/replacing the loading edge trim (X7 2019-2022)
>>
Removing the loading edge trim
Removing the loading edge trim
Precondition
Luggage compartment floor trim Is raised
Preliminary work
Refer to
REMOVING THE FLAP FROM THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE LEFT
.
Refer to
REMOVING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT
.
Refer to
REMOVING STORAGE COMPARTMENT AT LEFT
.
Refer to
REMOVING THE RIGHT STORAGE COMPARTMENT
.
Loosen screws
(1)
.
Slide the loading edge trim
(2)
to the front a little and feed out of the rear guides.
Remove the loading edge trim
(2)
.
Courtesy of BMW OF NORTH AMERICA, INC.