Installing starter motor

Precondition 

Acoustic cover of the oil pan has been removed.

• Insert and install the starter motor (2).
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Starter motor to crankcase
  M8x60	Tightening torque	19 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE ACOUSTIC COVER FOR THE OIL SUMP .
• Refer to INSTALLING THE STIFFENING PLATE .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .
• Refer to DEACTIVATING VEHICLE-SPECIFIC HIGH-VOLTAGE OR LOW-VOLTAGE VEHICLE ELECTRICAL SYSTEM .