Installing the front right door sill cover strip

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the front door sill cover strip

Remove clips (1) remaining in the body and mount them on the front door sill cover strip (3).
Check if the clips (1) and the guides (2) are damaged and if available, replace the clips (1) if necessary.
Damaged or missing clips (1) and guides (2) must be replaced.

Courtesy of BMW OF NORTH AMERICA, INC.
Install front door sill cover strip (1) and connect and lock the plug, if necessary.
Position front door sill cover strip (1) on body.
Lock front door sill cover strip (1) using clamps (2) and clips (3).

Courtesy of BMW OF NORTH AMERICA, INC.