Install fan cowl

Remove guard for the cooler fins 

• Remove guard (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Carefully maneuver fan cowl (2) in the arrow direction and install it.
• Ensure that locks (1) engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure clamps (3).
• Connect connectors (2) and lock.

  The connector (2) must engage audibly.

• Connect connectors (1) and lock.

  The connector (1) must engage audibly.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Maneuver and install the auxiliary coolant pump (3) at the exhaust turbocharger (4) in the arrow direction.
• Make sure that the lock (2) snaps in audibly.
• Connect connectors (1) and lock.

  The connector (1) must engage audibly

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the bracket (2) to the fan cowl (3).
• Secure the clamp (1) on the fan cowl (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR TOP CROSS CONNECTION .
• Refer to INSTALLING THE RIGHT AND LEFT UNFILTERED-AIR DUCT .
• Refer to INSTALLING BOTH INTAKE FILTER HOUSING .
• Refer to INSTALLING ACOUSTIC COVER .
• Refer to INSTALLING TENSION STRUT ON LEFT AND RIGHT SHOCK TOWER .
• Refer to INSTALLING UPPER CROSS CONNECTION .
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT .