Removing the A-pillar trim panel

NOTE: Description is for left component only. Procedure on the right side is identical.

WARNING: Pyrotechnic components.
Danger! Immobilization period-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

Unclip cover panel (1) and unscrew the bolt below it.
Detach A-pillar trim panel (2) from the clips (3) and remove upward.

Courtesy of BMW OF NORTH AMERICA, INC.