Remove rear door trim

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.

Release screws on the rear handle (G06)

Unclip covers (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Lever out the cover (1) on the inside door handle with the special tool 0 493 681 (64 1 020) and release the screw underneath.

Courtesy of BMW OF NORTH AMERICA, INC.
Lever out the cover (1) using the special tool 0 493 681 (64 1 020)as depicted and unscrew the screw underneath.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip the door trim panel (1) with the special tool 0 496 569 (00 9 325)on the clips (2).
Feed the door trim panel (1) upwards out of the window channel strip and pull it away from the door a little.
Make sure that the cover for the door window frame is not damaged (mask off if necessary).
CONSUMABLE SPECIFICATION

Yellow plastic adhesive tape 83199410979

Courtesy of BMW OF NORTH AMERICA, INC.
Detach the Bowden cable of the door opener (1) on the counter support (2).
Detach the Bowden cable of the door opener (1) on the door lock (3).
Unlock plug connection (4) and disconnect.
Remove door trim panel.

Courtesy of BMW OF NORTH AMERICA, INC.