Install glove compartment

• Guide the glove compartment into the dashboard and also connect and lock all plugs.
• Slightly raise the glove box lid (1) as shown and tighten the screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Glove compartment to dashboard
  screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1) from behind on the hinge of the glove compartment.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Glove compartment to dashboard
  screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screws (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Glove compartment to dashboard
  screw	Tightening torque	1.8 Nm

• Installing covers (1) on the glove compartment.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Glove compartment to dashboard
  screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1) in the glove compartment.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Glove compartment to dashboard
  screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fasten the plug connection (1) at the glove compartment.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE GLOVE BOX LIGHT .
• Refer to INSTALLING RIGHT FOOTWELL TRIM .
• Refer to INSTALLING THE SIDE PANEL ON DASHBOARD ON THE RIGHT .