4100 Body Technical Data
4100 TECHNICAL DATA OVERVIEW
| Air drying time after the order | ||
| Betawipe 4800 | 2 min | |
| Filler S1 | ||
| Processing time 20°C |
90 min | |
| Processing time 30°C |
60 min | |
| Curing time 60°C |
60 min | |
| Storage | 15°C... 25°C | |
| Shelf life (observe expiration date on the cartridge) | 12 Months | |
| Gap dimension, hood to front outer bumper cover | ||
| 1 hood; 2 front bumper cover | a | 4.3 +1.5-1.5 mm |
| b | 2.1 +1.5-1.5 mm | |
| Gap dimension, rear door to rear wheel arch trim | ||
| 1 rear door; 2 rear wheel arch trim | a | 4.0 +1.1-1.1 mm |
| b | 1.4 +1.2-1.2 mm | |
| Gap dimension between tailgate and rear trim | ||
| 1 tailgate; 2 rear trim | a | 1.5 +1.3-1.3 mm |
| b | 1.5 +1.5-0 mm | |
| Gap dimension front door to door sill trim panel | ||
| 1 front door; 2 door sill trim panel | a | 4.2 +1.2-1.2 mm |
| Gap dimension front door to rear door | ||
| 1 front door; 2 rear door | a | 4.5 +1-1 mm |
| b | 0 +1.5-0.3 mm | |
| Gap dimension glass slide/tilt sunroof panel, rear, to roof outer skin | ||
| 1 Glass slide/tilt roof panel, rear; 2 roof outer skin | a | 0.6 +0.8-0.8 mm |
| Gap dimension hood to headlight | ||
| 1 hood; 2 headlight | a | 6.4 +1.8-1.8 mm |
| Gap dimension hood to ornamental grille surround | ||
| 1 hood; 2 ornamental grille surround | a | 4.3 +1-1 mm |
| Gap dimension hood to side panel | ||
| 1 hood; 2 side panel | a | 3.3 +1-1 mm |
| b | 0 +1.6-1.6 mm | |
| Gap dimension of trunk lid to tail light | ||
| 1 Trunk lid; 2 tail light | a | 5.0 +1.5-1.5 mm |
| Gap dimension rear door to door sill trim panel | ||
| 1 Rear door; 2 door sill trim panel | a | 4.2 +1.2-1.2 mm |
| Gap dimension rear door to rear quarter panel | ||
| 1 rear door; 2 rear quarter panel | a | 3.8 +1-1 mm |
| b | 0 +1.3-0.3 mm | |
| Gap dimension rear quarter panel to trunk lid | ||
| 1 rear quarter panel; 2 trunk lid | a | 4.0 +1.2-1.2 mm |
| b | 1.0 +1.4-1.4 mm | |
| Gap dimension roof outer skin to glass slide/tilt roof panel, front | ||
| 1 Roof outer skin; 2 Glass slide/tilt roof panel, front | a | 0.6 +0.8-0.8 mm |
| Gap dimension roof outer skin to rear spoiler | ||
| 1 Roof outer skin; 2 rear spoiler | a | 4.5 +1.6-1.6 mm |
| b | 1.0 +1.7-1.7 mm | |
| Gap dimension side panel to A-pillar | ||
| 1 side panel; 2 A-pillar | a | 2.6 +1.1-1.1 mm |
| b | 0 +1.1-1.1 mm | |
| Gap dimension side panel to front door | ||
| 1 Side panel; 2 front door | a | 3.8 +1-1 mm |
| b | 0.5 +0.8-0.8 mm | |
| Gap dimension windshield to roof outer skin | ||
| 1 windshield; 2 roof outer skin | a | 4.3 +1.2-1.2 mm |
| b | 1.7 +1.5-1.5 mm | |
| Tap dimension glass slide/tilt roof panel front to rear | ||
| 1 Glass slide/tilt roof panel, front; 2 glass slide/tilt roof panel, rear | a | 0.7 +0.8-0.8 mm |