1700 COOLANT, TEST TECHNICAL DATA (X6 M50i)
1700 TECHNICAL DATA OVERVIEW
| Coolant level | |
| Overfill quantity of coolant (above the maximum mark) in the high-temperature expansion tank | + 200 ml |
| Overfill quantity of coolant (above the maximum mark) in the low-temperature expansion tank (if installed) | + 100 ml |
| Cooling system test pressure | |
| Test pressure for cooling system (gauge pressure) | 1.5 bar |
| Filling capacity of high-temperature coolant circuit G05/G06 N63B44M3 N63B44T3 | |
| N63B44M3/N63B44T3 | 12.6 l |
| N63B44M3/N63B44T3 (SA823) | 13.6 l |
| Low-temperature coolant circuit filling capacity G05/G07 | |
| N63B44M3/N63B44T3 | 5.4 l |
| Opening pressure of coolant seal cover | |
| Pressure relief valve opens when the pressure exceeds the ambient pressure. | min. 2.0 bar |
| Electric changeover valve must open at latest when the pressure is lower than the ambient pressure | max. 0.1 bar |
| Test conditions for coolant level | |
| Coolant must be cooled down | |