Install the strut brace
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
- Install the strut brace (2).
- Replace screws (1).
Parts: Screws
- Tighten the bolts (1) with the special tool 0 490 504 (00 9 120)
. TIGHTENING TORQUES SPECIFICATION
Strut brace M10x55 screw Replace screws Snug torque 56 Nm Angle of rotation 90°