Removing the front underbody protection

NOTE: TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.

Remove screws (arrows).
Feed out and remove the front underbody protection (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Removing the front skid plate

NOTE: The following step(s) must be performed if the specified component(s) is/are installed.

NOTE: TECHNICAL INFORMATION
Secure component against falling.
Remove screws (arrows).
Loosen screws (1) and (2).
Feed out and remove the front skid plate.

Courtesy of BMW OF NORTH AMERICA, INC.