Remounting the LED turn signal

Removing LED turn indicator/daytime running lights 

• Loosen screws (1)  .
• Pull the LED turn indicator/daytime running lights (2)  from the headlight.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Unlock and disconnect the connector (1)  from the LED turn indicator/daytime running lights (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  Installing LED turn signal for daytime driving lights 

• Check the seal (3)  on the LED turn signal/daytime running lights (2)  for damage and replace as needed.
• Connect connectors (1)  and lock.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Position the LED turn signal/daytime running lights (2)  in the headlight.
• Tighten down screws (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.