Installing the LED turn indicator/daytime running lights on the right

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing LED turn signal for daytime driving lights

Check the seal (3) on the LED turn signal/daytime running lights (2) for damage and replace as needed.
Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the LED turn signal/daytime running lights (2) in the headlight.
Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

LED turn signal on headlight
screw	Tightening torque	1.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.