Removing C-pillar trim panel

Preliminary work

WARNING: Pyrotechnic components.
Danger! Immobilization period-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

NOTE: RISK OF DAMAGE
Damage to the head airbag.
Improper use of a tool when removing the trim panel may damage the head airbag.

NOTE: Description is for left component only. Procedure on the right side is identical.

Lever out the cover panel (1) from the C-pillar trim panel (2) with a suitable tool.
Release screw below it.
Feed the C-pillar trim panel (2) out and upwards and remove.

Courtesy of BMW OF NORTH AMERICA, INC.