Replace the center trim

Removing ultrasonic sensors

NOTE: The description is provided only at one component. The procedure is the same for all other components.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Unlock the detents (1) and release the ultrasonic sensor (2) from the bumper cover.
Perform the steps on all other ultrasonic sensors.

Courtesy of BMW OF NORTH AMERICA, INC.
Remove the cover (1) for the towing eye.

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the trim (1).
Parts: trim

Courtesy of BMW OF NORTH AMERICA, INC.
Install the cover (1) for the towing eye.

Courtesy of BMW OF NORTH AMERICA, INC.