Removing the side member of the luggage compartment trim panel

Preliminary work

Refer to REMOVING THE STORAGE SHELF .
Refer to REMOVING LUGGAGE COMPARTMENT FLOOR COVERING .
Refer to REMOVING THE COVER OF THE SIDE MEMBER .
Refer to REMOVING BATTERY COVER .
Refer to REMOVING THE LOADING EDGE TRIM .
Refer to REMOVING THE COVER OF THE SEAT BELT FINISHER STRIP .
Refer to REMOVING THE D-PILLAR TRIM PANEL .
Refer to REMOVING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
Refer to REMOVING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .

NOTE: Description is for left component only. Procedure on the right side is identical.

Remove the foam material insert (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1).
Release the nut (2).
Remove the side member of the luggage compartment trim panel (3).

Courtesy of BMW OF NORTH AMERICA, INC.