Installing the lower section of the front wall

• Feed in and install the lower section of the front wall (3)  .
• Tighten nuts (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Firewall lower part on body
  Screw/nut	tightening torque	2.6 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (2)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Firewall lower part on body
  Screw/nut	tightening torque	2.6 Nm

• In the case of Plug-in Hybrid Electric Vehicle 

  Secure the positive battery cable on the holder.

Follow-up work 

• Refer to INSTALLING THE CENTER COWL UPPER PART .
• Refer to INSTALLING THE REAR HOOD SEAL .
• Refer to INSTALLING WINDSHIELD PANEL COVER .
• Refer to INSTALLING LEFT AND RIGHT WIPER ARM .
• Refer to INSTALLING THE REAR RIGHT ENGINE COMPARTMENT COVER .
• Refer to INSTALLING THE COVER OF THE ENGINE COMPARTMENT ON THE REAR LEFT .