LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
X6 sDrive40i
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Interior/Exterior Trim
>>
Body Equipment -- Repair (G06) (2 Of 2)
>>
51 47 Floor-Trunk-Engine Compartment-Trim Panels
>>
51 47 138 Removing and installing/replacing anti-slip rail
>>
Install automated slide and anti-slip rail
Install automated slide and anti-slip rail
Install automated slide and anti-slip rail
(3)
from the front and tighten the screws
(2)
.
TIGHTENING TORQUES SPECIFICATION
Automated slide & anti-slip rail to luggage compartment floor covering
screw
Tightening torque
2 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Glue on the sound insulation
(1)
in the screws
(2)
area again.
Courtesy of BMW OF NORTH AMERICA, INC.