1252 Y-CABLE, GROUND CABLES (X6 M50i)
1252 TIGHTENING TORQUE OVERVIEW
| Cable duct to cylinder head cover/cylinder head | ||
| M6 screw | Tightening torque | 10 Nm |
| Ground cable on cylinder head cover/ground pin | ||
| Nut M5 | Tightening torque | 4.6 Nm |
| Ground cable to hold-down device | ||
| Nuts | Tightening torque | 5.5 Nm |
| Y-cable at housing | ||
| M5 Replace screws. |
Tightening torque | 4.5 Nm |