1251 ENGINE WIRING HARNESS (X6 M50i)
1251 TIGHTENING TORQUE OVERVIEW
| Engine wiring harness to cylinder head cover | ||
| M6 | Tightening torque | 10 Nm |
| Ground cable to cylinder head cover/cylinder head | ||
| M6 | Tightening torque | 10 Nm |
| Wiring harness mounting to highly integrated electrified drive topology | ||
| Tightening torque | 8 Nm | |
| Wiring harness on the cylinder head cover | ||
| M6x14 screw | Tightening torque | 10 Nm |
| Wiring harness to cylinder head cover | ||
| M6x16 screw | Tightening torque | 10 Nm |