Install ignition coil

• Install ignition coil (3).
• Tighten down screw (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Ignition coil
  Screw	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.

  The connector (1) must engage audibly.

• Attach connector (1) of the primary oxygen sensor and the monitoring oxygen sensor to the cable duct (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to WHEN WORKING ON THE LAST CYLINDER: MOUNTING THE SERVICE OPENING IN THE SOUND INSULATION ON TOP OF THE ENGINE .
• Refer to INSTALLING ACOUSTIC COVER .