Installing the speaker cover from the door trim panel

• Saw off all welding pins on the speaker cover (1) along the molding (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Remove welding remnants on door trim panel with a scalpel.
• Install the speaker cover (1) and lock on the detents (2).

  The welding pins must not protrude through the door trim panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Screw in and tighten the repair screws (arrows).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Decorative strip/speaker trim to door trim panel
  screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

  CONSUMABLE SPECIFICATION
  
  

  Repair screw  Delta PT4

  ø4 mm, l = 12 mm,

  07149200941

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE DECORATIVE STRIP ON THE DOOR TRIM PANEL .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to MOUNTING THE MIRROR TRIANGLE COVER .