5171 Gaskets And Loose Body Parts
5171 TIGHTENING TORQUE OVERVIEW
| Adjusting element and adjusting holder for rear trim on tailgate | ||
| KOMBI M6 hexagon nut with clamping piece | Tightening torque | 3.5 Nm |
| Adjusting element spoiler on trunk lid | ||
| M5 screw | Tightening torque | 2.7 Nm |
| Firewall lower part on body | ||
| Screw/nut | Tightening torque | 2.6 Nm |
| Connecting support on tunnel to body | ||
| Hexagon screw M10x25 Replace screws |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Cover, steering unit | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |
| Cowl upper part on sealing frame | ||
| TS5X20 | Tightening torque | 2.5 Nm |
| Cowl upper part to bottom cowl | ||
| Screw | Tightening torque | 2.6 Nm |
| Lower front wheel arch cover | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |
| Strut brace | ||
| M10x55 screw Replace screws |
Snug torque | 56 Nm |
| Angle of rotation | 90° | |
| Tension strut on the rear cross connection | ||
| M8x30 screw | Tightening torque | 28 Nm |
| Tension strut to shock tower | ||
| M10x55 screw Replace screws |
Snug torque | 56 Nm |
| Angle of rotation | 90° | |
| Wheel arch cover | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |