3300 Rear Axle, General
3300 TIGHTENING TORQUE OVERVIEW
| Heat shield to servomotor holder | ||
| M5 | Tightening torque | 4.5 Nm |
| Heat shield to underbody | ||
| Screws and nuts | Tightening torque | 3 Nm |
| Heat shield to vehicle underbody | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
| Rear axle cover holder on rear axle differential suspension | ||
| M12 | Tightening torque | 18 Nm |
| Rear axle cover on holder/rear axle differential | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |
| M6 | Tightening torque | 9 Nm |