Removing the steering column switch cluster (SZL)

WARNING: Pyrotechnic components.
Danger! Immobilization period-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

Preliminary work

Refer to DEACTIVATING THE 48 V ELECTRICAL SYSTEM .
Refer to ADJUSTING THE STEERING COLUMN POSITION .
Refer to DEACTIVATING VEHICLE-SPECIFIC HIGH-VOLTAGE OR LOW-VOLTAGE ELECTRICAL SYSTEM .
Refer to REMOVING THE AIRBAG UNIT (SPORTS STEERING WHEEL) .
Refer to REMOVING THE STEERING WHEEL (SPORTS STEERING WHEEL) .
Refer to REMOVING STEERING COLUMN SHROUD UPPER SECTION .
Refer to REMOVING STEERING COLUMN SHROUD LOWER SECTION .

Loosen screws (1) .
Remove the steering column switch cluster (SZL) (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock and disconnect plug connections (1) at the steering column switch cluster (SZL) (2) .

Courtesy of BMW OF NORTH AMERICA, INC.