Installing the acoustic cover for the oil sump

• Insert and install the acoustic cover of the oil sump.
• Feed in all the expanding rivets (1) in the marked area and install.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock connector (1).

  Make sure the connector (1) engages audibly.

• Secure clamps (2).
• Insert and install the positive battery cable (4).
• Secure positive battery cable (4) at the clamp (5).
• Tighten the nut (3) hand-tight.

  Courtesy of BMW OF NORTH AMERICA, INC.

  CAUTION: Improper routing of the positive battery cable. 
  Risk of short circuits! 

  • Route the positive battery cable without abrasions and do not trap.
• Correctly attach positive battery cable (1) to the antitwist lock (2).
• Tighten nut (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE STIFFENING PLATE .
• Refer to DEACTIVATING VEHICLE-SPECIFIC HIGH-VOLTAGE OR LOW-VOLTAGE VEHICLE ELECTRICAL SYSTEM .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .