1115 CRANKCASE VENTILATION SYSTEM (X6 M50i)
1115 TIGHTENING TORQUE OVERVIEW
| Carrier plate to the cylinder head covers | ||
| M6x12 screw | Tightening torque | 10 Nm |
| Engine ventilation line | ||
| Screw | Tightening torque | 10 Nm |
| Engine ventilation line on cylinder head cover | ||
| Engine ventilation line | Tightening torque | 10 Nm |
| Lid of primary oxygen sensor | ||
| M6x16 screw | Tightening torque | 10 Nm |
| Oil separator to cylinder head cover | ||
| M6 screw | Tightening torque | 10 Nm |