Remove the top right cover in the engine compartment
- Loosen the seal for hood (1) in the area of cover (3) using the special tool 2 298 505 on the clips.
- Release the expanding rivets (arrows).
- Open and remove the cover (2) of the washer fluid reservoir.
- Guide out and remove the cover (3).
- Only for F95/F96 LCI vehicles:
- Loosen the seal for the hood (1) in the area of the cover (3) on the clips using the special tool 2 298 505 .
- Release the expanding rivets (arrows).
- Open and remove the cover (2) of the washer fluid reservoir.
- Loosen screw (4).
- Feed out the cover (3) and remove.