1290 ECM HOUSING (X6 M50i)
1290 TIGHTENING TORQUE OVERVIEW
| Control unit holder | ||
| Hexagon screw | Tightening torque | 8 Nm |
| High-voltage connection to housing | ||
| M5 | Tightening torque | 5 Nm |
| Lid of E-Box to lower part | ||
| Tightening torque | 2.5 Nm | |
| Tension relief to highly integrated electrified drive topology | ||
| Tightening torque | 19 Nm | |
| Wiring harness section bracket on the shock tower | ||
| M6 | Tightening torque | 8 Nm |