LEMON Manuals
: Even more car manuals for everyone
Home
>>
BMW
>>
2021
>>
X6 M50i
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Anti-Theft Systems
>>
Body Equipment -- Repair (G06) (2 Of 2)
>>
51 47 Floor-Trunk-Engine Compartment-Trim Panels
>>
51 47 133 Removing and installing/replacing drive for the anti-slip rail
>>
Install drive for the automated slide & anti-skid rail
Install drive for the automated slide & anti-skid rail
Install drive for the automated slide & anti-skid rail (3) and tighten the screws (2).
TIGHTENING TORQUES SPECIFICATION
Removing drive for the automated skid and non-slip rail on the luggage compartment floor covering
Screw
tightening torque
2 Nm
Courtesy of BMW OF NORTH AMERICA, INC.
Connect connectors (1) and lock.
Courtesy of BMW OF NORTH AMERICA, INC.