Installing Roof function center (FZD)

Connect connectors (1) and lock.
Clip the cable for the roof function center (FZD) (2) into the cable clip.

Courtesy of BMW OF NORTH AMERICA, INC.
Thread the roof function center (FZD) (1) into the guides (3).
Engage the Roof function center (FZD) (1) with the clamps (2) towards the top.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Roof switch center
Screw	Tightening torque	1.2 Nm

Courtesy of BMW OF NORTH AMERICA, INC.