Install the decorative strip on the right dashboard

• Position decorative strip (2).
• Connect plug connections.
• Engage the decorative strip (2) on the clamps (3).
• Tighten down screw (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard
  screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1) on the decorative strip (2) at side.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard
  screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SIDE PANEL ON DASHBOARD ON THE RIGHT .
• Refer to INSTALLING THE INSTRUMENT CLUSTER TRIM .