Install the decorative strip on the dashboard on the left

• Position decorative strip (1).
• Connect plug connections.
• Engage the decorative strip (1) on the clamps (2) and (3).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screws (1) on the decorative strip (2) at side.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Dashboard
  screw	Tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE SIDE PANEL ON LEFT DASHBOARD .
• Refer to INSTALLING THE INSTRUMENT CLUSTER TRIM .