Installing the side member of the luggage compartment trim panel

• Install the side member of the luggage compartment trim panel (3).
• Tighten the screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Side member trim panel to side member
  Screw	tightening torque	3 Nm

• Tighten nut (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

  TIGHTENING TORQUES SPECIFICATION
  
  

  Side member trim panel to side member
  Nut	tightening torque	3 Nm

• Install the foam part (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
• Refer to INSTALLING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
• Refer to INSTALLING D-PILLAR TRIM PANEL .
• Refer to INSTALLING COVER OF THE SEAT BELT FINISHER STRIP .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE BATTERY COVER .
• Refer to INSTALLING COVER FOR THE SIDE MEMBER .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to INSTALLING THE STORAGE SHELF .