5164 Front Panel, Front End (X6 M 2020-2023)
5164 TIGHTENING TORQUE OVERVIEW
| Strut brace to spring support | ||
| Hexagon screw M10x55 Replace screw |
Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Cross-brace to firewall | ||
| Hexagon screw M10x55 | Joining torque | 56 Nm |
| Angle of rotation | 90° | |
| Front-end strut to strut brace | ||
| Torx screw M8x30 | Snug torque | 28 Nm |
| Angle of rotation | 90° | |
| Front-end strut to upper rear connection | ||
| Torx screw M8x30 | Snug torque | 28 Nm |
| Angle of rotation | 90° | |
| Hexagon screw M10x35 | Tightening torque | 50 Nm |
| Rear top cross connection to wheel arch carrier support | ||
| M10x35 screw | Tightening torque | 56 Nm |
| Air flap control/brake ventilation duct | ||
| Screw | tightening torque | 4 Nm |
| Front cross connection | ||
| Screw | Tightening torque | 19 Nm |
| Rear cross connection at the top of the hood lock support | ||
| screw | Tightening torque | 19 Nm |
| Front reinforcement strut | ||
| screw | Tightening torque | 24 Nm |
| Top front cross connection to hood lock support | ||
| screw | Tightening torque | 19 Nm |
| Hood lock support to support for bumper cover | ||
| Hexagon screw M8x20 | Tightening torque | 19 Nm |
| Holder for the external radiator to support | ||
| M6x20 | Tightening torque | 11.8 Nm |