Install the trim on the side panel

Precondition

Front door is open.

NOTE: RISK OF DAMAGE
Mechanical effects.
Paint damage.

Mask those working areas at risk with yellow plastic adhesive tape.
Remove and install heavy or bulky components with the aid of another person/other persons.

Position the new trim (1) on the retaining lugs (2) and engage it.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the door sill trim panel (1) on the vehicle with the trim (3).
Clip in the door sill trim panel (1) along the dotted line (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Clean adhesive area (1) on the side panel.
CONSUMABLE SPECIFICATION

Cleaning agent R2 500 ml 83190417324
Clip in the trim (4) at clips (2) and (3).
Press on the trim (4) firmly at the adhesive strips in the adhesive area (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Clip in clips (3).
Tighten the screws (1).

Tighten nuts (2).

TIGHTENING TORQUES SPECIFICATION

Undershield, side
Hexagon screw	Tightening torque	2.6 Nm
Plastic nut	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.