Securing the fuel supply line on the left
- Position the fuel supply line (3).
- Tighten nut (2).TIGHTENING TORQUE SPECIFICATION
Fuel supply line/rail to high pressure pump Nut tightening torque 30 Nm - Replace double bolt (1).
Parts: Stud bolt
- Tighten the stud bolt (1).TIGHTENING TORQUE SPECIFICATION
Fuel delivery line Double banjo bolt M6/screw M6x16 tightening torque 10 Nm - Tighten down screws (1).TIGHTENING TORQUE SPECIFICATION
Fuel delivery line Double banjo bolt M6/screw M6x16 tightening torque 10 Nm