Securing the front left and right brake caliper

NOTE: Description is for left component only. Procedure on the right side is identical.

Fastening the front brake caliper

NOTE: TECHNICAL INFORMATION
Secure component against falling.

Release and remove special tool 2 413 317.
Do not let the brake caliper (1) hang from the brake hose.

Courtesy of BMW OF NORTH AMERICA, INC.
Position the brake caliper in arrow direction on the swivel bearing.
Replace screws (1).
Parts: Screws

Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATION

Brake caliper/brake anchor plate at front swivel bearing
M12 Replace screw.	Tightening torque	130 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Attach the cable (2) on the holder (3).
Only left: Attach the cable (1) on the holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Fasten brake hose (1) to the brackets (2).

Courtesy of BMW OF NORTH AMERICA, INC.