Removing the cross of the transmission wiring harness

Unclip the tank vent line (2) from the clamp (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (3).
Unlock plug connection (1) and disconnect.
Unlock plug connection (2) and disconnect.
Unclip the transmission wiring harness (5) from the clamp (4).

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip the cable of the Lambda oxygen sensor from the clamp (1).
Loosen screws (2).
Unclip the transmission wiring harness from the clamps (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip the transmission wiring harness from the clamps (1).
Loosen screw (2).
Release the clip (3) of the wiring harness of the fuel injection valves/ignition of the cylinders 1 to 4 from the cross of the transmission wiring harness (4).
Feed out and remove the cross of the transmission wiring harness.

Courtesy of BMW OF NORTH AMERICA, INC.