Install the cover in the engine compartment at top left and right

Install the cover in the engine compartment on top 

• Guide in and correctly position the cover (2).
• Clip the seal for hood (1) in the area of cover (2) to the clips.
• Mount the expanding rivets (arrows).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Only for F95/F96 LCI vehicles: 
• Guide in and correctly position the cover (2).
• Clip the seal for hood (1) in the area of cover (2) to the clips.
• Mount the expanding rivets (arrows).
• Tighten down screw (3).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Cover on front-end brace
  M8x12 screw	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Install the cover in the engine compartment on the top right 

• Guide in and correctly position the cover (3).
• Mount the expanding rivets (arrows).
• Clip the seal for hood (1) in the area of cover (3) to the clips.
• Mount the lid (2) of the washer fluid reservoir.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Only for F95/F96 LCI vehicles: 
• Guide in and correctly position cover (3).
• Clip the seal for hood (1) in the area of cover (2) to the clips.
• Mount the expanding rivets (arrows).
• Tighten down screw (4).
  TIGHTENING TORQUE SPECIFICATION
  
  

  Cover on front-end brace
  M8x12 screw	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Mount the lid (2) of the washer fluid reservoir.