Install left and right wiper arm

NOTE: Description is for left component only. Procedure on the right side is identical.

Install wiper arm

NOTE: TECHNICAL INFORMATION
The wiper system must be in the zero position.
After installing the cowl cover and before installing the wiper arms:
Operate wiper system 1x to ensure wiper system is in the correct installation position.

Connect the wiper arm (3).
Correctly position the wiper arm (2) in relation to the window edge (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Description is for left component only.
Procedure on the right side is identical.
Replace nut (2).
Parts: Nut
Tighten nut (2).
Connect the protective cap (1).

Courtesy of BMW OF NORTH AMERICA, INC.