Removing the left and right retaining frame

NOTE: Description is for left component only. Procedure on the right side is identical.

Removing the retaining frame

Loosen screw (1).
Feed out the holder (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock plug connections and disconnect.
Release the wiring harness (1) from all clips and remove it from the working area.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen blind rivet (1).
Release the retaining frame (2) at the detents (arrows) and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.